Feb 26 2017 - Posted on 2017-02-26 by Kris Wells

Went through signal flow on an analog mixer with Nick. No signal at first. We replaced the xlr cable but in the end, the mic had a broken wire.

At a church I went to, the acoustic guitar was feeding back during rehearsal. This was because the gain on the guitar was too high. By turning the guitar's gain down and boosting the levels on the board, the feedback issue was resolved.

Not super relevent to live sound but still interesting, I learned that plate reverbs are physically quite large.

Did lessons 1 and 2 of the ebook.