Kyle Pardo
Today at the studio we started out by testing all of the outboard gear in the mez. We ran a signal from a mic through it all to make sure everything was running smoothley... Read More >>
Kyle Pardo
Today at the studio we started out by testing all of the outboard gear in the mez. We ran a signal from a mic through it all to make sure everything was running smoothley... Read More >>
Kyle Pardo
Today was a holiday at the studio so there wasn't too much going on, however this allowed me to get more experiance with mic placement... Read More >>
Kyle Pardo
Today in the studio we started out in the mastering room with Marc. We went over the process of mastering and learned the path the audio takes in the mastering room... Read More >>
Kyle Pardo
Today we were tasked with creating a commerical upstairs in the Mezzanine. We had to get at least one source from a mic, from midi, and from sampling... Read More >>
Kyle Pardo
To start off the day we went to the mic locker and went over all of the different types of mics (condenser, dynamic, ribbon), their polar pattrns (Cordioid, omnidirectional), as well as the sounds that the mics were good at capturing... Read More >>
Kyle Pardo
Today at the studio, one of the eq's on the SSL console in the mez stopped working. We were there with Chris, who took out the specific channel that wasn't working and played around with it untill he was able to diagnose the problem... Read More >>
Kyle Pardo
At the sudio we created a set up in order to create a stereo guitar signal. First, the recording room was set up with two different amps, one on each side of the room... Read More >>