We started learning about dynamic mics and condenser mics. The first basically requires no power source and records via a coil and is used mainly for less intricate/detailed sounds. The condenser mic feeds off phantom power and picks up higer and lower frequencies as well as volumes, thus allowing more intricate sounds (whispers, deep voices, etc) to be recorded. I also learned that an electrical signal is transmitted from the mic outwards to an amplification source but that signal is too weak so a preamp must be used: this basically enhances the signal before it gets to the amp to be heard loud and clear.
Spencer Payne — Richmond Recording Connection
More Blog Entries from Spencer Payne
Sean and I went over briefly any questions I had on ProTools basics including latency, buffer size, and the playback engine before his session started... Read More >>
This will cover a few classes, but I've since started working woth another engineer at Da Spot, named Sean. We started going over microphones: dynamic, condenser, ribbon, and polar patterns like cardioid, omni-directional, and bi-directional... Read More >>